Introduction for the small computerized embroidery machine

　　When adding embroidery for embroidery and zigzag stitch and serrated, should be the first line of all head and thread wheel dribbling marathon, at the same time to pin all the mentioned high, the mechanical hand does not work, then reverse, or tear the cloth may. The embroidery is completed, put all the line wheel dribbling good after finishing, the tube feet down, the manipulator mounted to the working position, and then pull rod drive.

　　Firstly, use embroidery CAD software plate to generate sample, make of the disc containing a embroidery program and pattern respectively into the computer disk drive, under the control of a program, computerized embroidery machine will be synchronized coordinates into and stretched frame X, Y direction displacement amount equivalent electrical signal, sent to the X, Y, Z microcontroller system motor speed control, output three-phase six meters, power box line motor power amplification, red X, Y stepper motor, drive the feed motion stretched frame to complete the X, Y; at the same time driven Z stepper motor, drives the needle moves up and down, so that the continuous of embroidery down.

　　Above is the introduction for small computerized embroidery machine, the product's design is fine, with sophisticated technology, maintenance simple and easy to use, you can absolutely trust company, you are welcome to come to discuss cooperation, sharing the future!